MFDS Lab HT ST Dental Coloring Liquid HT A1 A2 Dyeing Solution

Dental Lab Use Zirkonia Disc HT A1 A2 Dyeing Solution HT ST White Zirconia Blocks Coloring Liquid

Dyeing Solutions (Zircpnia Coloring Liquid)

1. Simple and fast operate process 1minute dipping

2. Stable color result

3. Using with Yucera zirconia block have perfect effect

4. Penetration can reach 1.5mm color will not be removed even grinding

Note for Zirconia Coloring Liquid:

• 1. Dyeing liquid and crown should keep clean and dry. (Water processing is not suggested. The crown should be dried before dyeing if it' s produced under water processing)

• 2. Dyeing liquid is weakly acidic. Please wear gloves for people with sensitive skin, if it gets in your eyes accidentally, rinse immediately with water and seek medical treatment in time.

• 3. Do not dilute the dyeing solution with water by yourself to avoid affecting the color stability.

• 4. After dyeing, the crown should be dried before sintering. To avoid contamination of the internal components of the sintering furnace and hidden cracks in the crown.

• 5. For dyeing of bridge, it is recommended to use 01 liquid +brushing method to reduce the color difference between the bridge body and crowns.

• Dry 30 minutes for single crown and consecutive crown (thickness<2 mm), dry more than 60 minutes for bridge orthicker crown.The distance between infrared drying lamp and crown is according to the power of lamp. Usually the temperature on the surface of crown should be less than 100°C.

Instruction for Zirconia Coloring Liquid for incisal:

Brush TO liquid 2-3 times on 1/3 parts of incisal with OP brush or No.1 glaze brush.

Dyeing Fossa and Groove:

Brush fossa and groove coloring liquid with No. 0 or No. 00 glaze brush (Only brush main fossa and groove) or brush A3 liquid twice with No.4-6 porcelain bush.