Ultra Translucent Multilayer Cad Cam Ceramic Dental Zirconia Block
For Dental Full Contour Crown
Natural Color Transition,No Need Dyeing
zirconia blocksare made of nanometer medical grade zirconia powder.
The powder are firstly compacted by cold isostaticpressing with
high compressive strength and then pre-sintered to a certain degree
to offer good machinability.
UT zirconia blocks can be used to create crowns, bridges, inlays
and veneers of fixed partial denture with different translucency
levels and colors.
Ultra Translucent Zirconia Block
1. Ultra translucency with total light transmission rate >50%
(comparable to lithium disilicate)
2. Average strength over 800 Mpa (can be used in a variety of
all-ceramic restorations such as onlay/inlay, crown, bridge and so
on)
3. Highly accurate Vita standard coloring liquid to meet the
requirements of high standard dental restoration
4. Excellent machinability owing to unique shaping technique
5. Top quality medical-grade nanometer zirconia powder
6. Ok for Anterior + Posterior teeth
Product equipment
Our main products are ceramic denture zirconia block, corresponding
CAD/CAM equipment, 3D printing equipment and other related dental
products. As professional oral materials supplier, we can provide
digital dental materials, dental equipment, and full range of
digital products and services.
Zirconia Block Introduction
Yucera zirconia block has high strength, excellent permeability and
color aesthetic repair effect that suitable for CAD/CAM system and
manual system.
Product Features
Safety:No irritation,No corrosion,Good bio-compatibility
Beauty:Natural teeth color can be reproduced
Comfortability:Low thermal conductivity,hot and cold changes do not
stimulte the pulp
Durability:Over 1600MPa perturbed strength, durable and useful
SHT/UT/3D multilayer Sintering Curve
| SHT/UT/3D multilayer Sintering Curve |
| Sintering step | Start Temperature(℃) | End Temperature(℃) | Time(Min) | Rate(℃/Min) |
| Step 1 | 20 | 900 | 90 | 9.7 |
| Step 2 | 900 | 900 | 30 | 0 |
| Step 3 | 900 | 1500 | 180 | 3.3 |
| Step 4 | 1500 | 15 | 120 | 0 |
| Step 5 | 1500 | 800 | 60 | -11.6 |
| Step 6 | 800 | natural cooling 20 | 120 | -6.5 |
UT Multilayer Color Zirconia Block
* Pre-shaded technics
* uniform color
* without post deying process
* suitable for full contour crown,brige and anterior
Indications: Crown, Inlay, Onlay, 2-5 unit Bridges, Anterior
We have already passed the CE and ISO certification.
I’m sure that our factory is good enough for your program in your
market.
Welcome any comments.
