0.2mm 5 Axis Dental Milling Machine Table Dental For Zirconia Block
Dental 5 axis milling machine table dental for zirconia block, PMMA
and Wax disc
Shenzhen Yucera Dental Material Co., LTD is a comprehensive
enterprise specializing in developing, manufacturing and marketing
of Dental Zirconia Ceramic Block, corresponding CAD/CAM equipment,
and other related dental products. As professional laboratory
materials supplier, we can provide digital dental materials, dental
equipment, and full range of digital products and services.
After 2 years of design and development,more than 100 labs tested,
our Separation of mechanical and electrical control get unanimous
praise :
1. Horizontal processing-speed can be increased by nearly 20%
2. simplifying maintenance- When the all-in-one machine fails, the
after-sales maintenance is more complicated. The split equipment
only needs to replace the processing system to complete the update
and maintenance;
3. Tool detection sensor with 2um
4. 24hours on-line technical support 5.include hyperdent(free)
Compared with traditional vertical processing milling machine,
Yucera seperated horizontal processing possess below advantages:
1. If the traditional all-in-one milling machine occure some
problems, the after-sales maintenance is more complicated. But our
split milling machine only needs to replace the processing system
to complete the update and maintenance;
2. The control system is separated from the processing system to
reduce the slight damage to the equipment caused by dust
Another advantage is new design for horizontal processing:
1. Horizontal processing VS Vertical machining,Based on the
original stable vertical machining, the horizontal cutting
equipment puts the center of gravity lower.
2. Vertical processing and horizontal processing are cradle
processing,There is not much difference between the two in the
layout and processing mode, but due to the excellent stability of
horizontal processing, the processing speed can be increased by
nearly 20%.
Are you looking for such a 5 axis dental milling machine? Yucera
SK-5A is the best alternative for your dental laboratory.
Technical parameter of dental 5 axis milling machine:
| size | Cutting machine: 550x565x460mm |
| Main machine: 450x250x450mm |
| Net Weight | Cutting machine: 95KG |
| Host: 20KG |
| Rotation angle | A 360° B:+30° |
| Power | 0.8kw |
| Milling precision | 0.2mm |
| Tools Library | 5 |
| Tool specifications | Special tools with a handle diameter of 4mm,
automatic tool change and automatic tool detection. |
| Processing method | five-axis linkage, manual milling |
| Machinable type | inner crown, full crown, bridge, planting bridge, temporary
restoration of crown post and core, inlay, bolt, telescopic crown |
| Maximum Speed | 0-60000rmp |
| Rated working pressure | 4.5-6.0bar (no oil and no water) |
| lnstallation conditions | Stable voltage: 220-230V stable pressure ≥ 6.0bar |
| Humidity: 1 5-35℃ Relative humidity <80% |
| Transmission interface | USB/Ethernet (rear UsB connector, wire connector) |
| Mill material | zirconia. wax.resin. composite materials |
Welcome to contact us
